Re: [LAU] Howto move devices to specific IRQ's ?

Am Mittwoch, 11. Juni 2008 schrieb Svend-Erik Kjær Madsen:
> I want to move my hdsp to another IRQ, but can't figure out howto, it is
> a matter of firmware version on my Multiface card ? I can't move the
> PCMCIA card since there is only one available slot....

Afaik most mainboards have hard-wired interrupts for the devices and the
slots.
So in a desktop-system moving devices in their slots is a way of changing
their interrupt.

With a laptop you are out of luck.
Then the only solution is to make sure that only one of the sharing devices is
used at a time. On my laptop fw and wifi are sharing and when I shut down the
network, I don't get problems with the firewire. Whereas on my big machine
one of the usb-ports is sharing with the graphics. Back when I used usb-audio
I figured which port it was and used that only for the mouse, not for
audio...

Arnold

-- 
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me 
to all your contacts.
After a month or so log in as root and do a "rm -rf /". Or ask your 
administrator to do so...

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user