Re: [LAU] Howto move devices to specific IRQ's ?

From: Svend-Erik Kjær Madsen <sv-e@email-addr-hidden-e.dk>
Date: Thu Jun 12 2008 - 00:01:35 EEST

ons, 11 06 2008 kl. 13:57 -0700, skrev Ken Restivo:
> On Wed, Jun 11, 2008 at 11:52:24AM +0200, =?ISO-8859-1?Q?Svend-Erik_Kj=E6r_Madsen_ wrote:
> > Hi
> >
> > I'm into shapeing up my system to work better. I have installed a Debian
> > lenny and migrated 64Studio multimedia packets on to it, and use
> > 64studio's kernel 2.6.21-1-multimedia-486, then installed irqbalance and
> > try to find the best setup for my RME Hammerfall Multiface card.
> >
> > I use a lenove T61 laptop and my problem is that the PCMCIA card share
> > IRQ with some usb device on IRQ 16:
> >
> > debian:~$ cat /proc/interrupts
> > CPU0 CPU1
> > 16: 5328 20016 IO-APIC-fasteoi uhci_hcd:usb4, yenta,hdsp
> >
> > I want to move my hdsp to another IRQ, but can't figure out howto, it is
> > a matter of firmware version on my Multiface card ? I can't move the
> > PCMCIA card since there is only one available slot....
> >
>
> You can't. Unless you have a ThinkPad. Or a desktop machine where you can move cards to different slots.
>
> -ken

Ok i have a Thinkpad, but cant figure the BIOS settings out, any clue ?

/Sv-e

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Thu Jun 12 00:15:37 2008

This archive was generated by hypermail 2.1.8 : Thu Jun 12 2008 - 00:15:37 EEST