Re: [LAU] Boss GT-10

Hello,
The "No mixer elems found" error is normal. A for the rest, I guess
you are not correctly selecting the device for recording.

arecord --device=default:CARD=GT10 -t wav -f s16_le -r 44100 -c 2 test.wav

works for me :)

Good luck,

Pedro

On Wed, Jul 30, 2008 at 4:10 PM, Tinco Andringa <mail@email-addr-hidden> wrote:
>
> Hello,
>
> I am a bit new to this so please bear with me. I'm trying to get my Boss GT-10 to work on my (arch) linux install.
>
> I added the patch that was suggested in the post I reply to to my usbquirks.h and compiled alsa using the guide on this site: http://www.alsa-project.org/main/index.php/Matrix:Module-usb-audio with as only difference that I configured with '--with-cards=all'.
>
> After this my BOSS GT-10 was recognised by linux and I am able to play sound over it using aplay. Recording however seems not to work. When I run arecord -L it shows all three of my audio cards, including the bossgt, but when I do alsamixer -c 2 it gives the following error: No mixer elems found. Using a command like arecord -d 5 -t wav test.wav just gives me the sound recorded by the microphone in another soundcard. It could be that it's just a matter of using -D to select the right PCM, but I'm not sure how to find the right PCM.
>
> I suspect this is the reason I cannot record, do you have any idea what goes wrong? Another question more out of curiosity, why does the patch specify USB_DEVICE(0x0592,0x00da) whilst the usb device as listed by lsusb has id 0x00db?
>
> If I need supply any specific information
>
> With kind regards and gratitude for the patch,
> Tinco Andringa
>
> --- In reply to: ---
> Clemens Ladisch cladisch at fastmail.net
>
> Thu Jul 24 12:04:48 EDT 2008
>
> edro Ferreira wrote:
>> OK, I've added the output as an attachment :).
>
> Sorry for the delay.
>
> Please try adding the entry below anywhere in sound/usb/usbquirks.h
> and recompile the driver:
>
>
> {
> /* BOSS GT-10 */
> USB_DEVICE(0x0582, 0x00da),
> .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
> .ifnum = QUIRK_ANY_INTERFACE,
> .type = QUIRK_COMPOSITE,
> .data = (const struct snd_usb_audio_quirk[]) {
> {
> .ifnum = 0,
> .type = QUIRK_AUDIO_STANDARD_INTERFACE
> },
> {
> .ifnum = 1,
> .type = QUIRK_AUDIO_STANDARD_INTERFACE
> },
> {
> .ifnum = 2,
> .type = QUIRK_MIDI_FIXED_ENDPOINT,
> .data = & (const struct snd_usb_midi_endpoint_info) {
> .out_cables = 0x0001,
> .in_cables = 0x0001
> }
> },
> {
> .ifnum = -1
> }
> }
> }
> },
>
>
>
> HTH
> Clemens
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today it's FREE!
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Thu Jul 31 04:15:01 2008