> Am Mittwoch, 10. September 2008 schrieb Cassiel:
> > In ardour:
> > put reverb/delay/flanger/phaser on a separate bus and route signal flow
> > with a send from your track to the fx bus, NEVER put those fxs on
> inserts,
> > otherwise you will lose the dry signal... not good at all
>
> Not exactly right. You will certainly want to apply the same acoustics to
> several tracks to get a good composition of the space. But it is also
> possible to have a delay in one track only for that track. And most
> (room-)effects provide a wet-dry-control so you have the original signal
> too.
Yes, that's certainly true but when dealing with fx chains >2 .. dealing
with dry/wet balance could be a pain in the ass.
>
>
> After all, one rule applies: If it sounds right, its right!
For sure
r
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Thu Sep 11 12:15:01 2008
This archive was generated by hypermail 2.1.8 : Thu Sep 11 2008 - 12:15:01 EEST