Jens M Andreasen wrote:
> If you know that the device is virtual and that it won't pass on any
> messages to the next device, you can sometimes get away with sending
> usb-midi at a higher rate. This has to be implemented at the driver
> level though.
This is handled by the USB protocol: the host controller retries sending
a data packet until the device acknowledges it. In other words, the
driver can blast away at the device with lots of packets, but the actual
rate is never higher than the device can handle, so the driver doesn't
need to specifically know about your device.
Best regards,
Clemens
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Thu Oct 8 12:15:02 2009
This archive was generated by hypermail 2.1.8 : Thu Oct 08 2009 - 12:15:02 EEST