Re: [LAU] setting up a Behringer BCF2000 for use with ardour

Hi uhoh,

On Mon, Oct 19, 2009 at 1:52 PM, uhoh <uhoh@email-addr-hidden> wrote:
>
> <snip>
> under the ALSA tab i have the following out ports (in addition to my sound
> card): MIDI 1 & 2 under the BCF2000 and control, mcu, & seq under ardour.
> the
> in ports are the same for ardour, but i have MIDI 1, 2, & 3 for the
> BCF2000.
> which outs connect to which ins?
>

Here's how it works for me and my BCR:
In QJackctl, my connections are like this:
Alsa tab:
BCR2000 MIDI 1 -> Ardour control
Ardour control -> BCR2000 MIDI 1

Ardour has Options>Control Surfaces> Generic Midi
&
Options>Control Surfaces>Controls> Feedback
both selected.

To assign a knob:
Ctrl+MidMouseClick on any parameter in the mixer or effect-edit & move a
BCR2000 knob.

Of course you have to use a preset on the BCR/BCF where knobs/faders send
out cc messages. :)

I think BCF's and BCR's both work the same...

Good luck ;-)
Peter

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Tue Oct 20 00:15:05 2009