Hi Paul.
OK - got it. I mean at least from a user perspective, by looking at
HDSPmixer, the HW-outputs seemed like single controls.
What's confusing on the first glance is that these cover a different gain
range and can be contolled independenly form the input
controls. I considered the outputs the vertical and the inputs the
horizantal layer of the matrix. Anyhow. Never mind.
Perhaps you could explain why in HDSPmixer the input group controls have a
range of -inf to +6db and the HW-outputs -inf to 0db.
THX
Klaus
On Sun, Oct 25, 2009 at 2:29 AM, Paul Davis <paul@email-addr-hiddenwrote:
> On Sat, Oct 24, 2009 at 10:46 AM, Klaus Schulz <kls.schlz@email-addr-hidden>
> wrote:
>
> > The pity is really that I can not control the attenuation on the
> hw-outputs
> > with amixer. I'll do that on the application side.
>
> there is no such control in the hardware. the matrix mixer only
> provides gain control for the signal level of a particular source to a
> particular output. the idea of "turning down channel 13" doesn't exist
> as an individual idea in this h/ w design - you have to turn down
> everything that feeds channel 13 instead.
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Sun Oct 25 16:15:03 2009
This archive was generated by hypermail 2.1.8 : Sun Oct 25 2009 - 16:15:03 EET