On Wed, 2010-01-20 at 07:34 -0500, Joe Dell'Orfano wrote:
> Hi all,
>
> I am testing fedora 12 on my 64-bit system using Planet CCRMA
> repositories. Everything boots and runs (even RT kernel) except my
> multiface II. On Fedora 8, the Multiface generally initialized at the
> udev phase of bootup. I say "generally" because at times it doesn't
> initialize, requiring several power off cycles. Interestingly, once the
> firmware is loaded by FC8, if I then boot into FC12 (I have it set up as
> a dual boot system in order to maintain my working production system),
> hdspmixer crashes (although hdspconfig works). It seems that the FC8
> firmware remains loaded (perhaps an older version of the alsa firmware).
> When I am in FC12, hdsploader fails with a "device busy" error.
>
> The multiface II is running off of PCIe on IRQ17, which is apparently
> shared with my Radeon card, also in PCIe port. I cannot reassign this
> IRQ in BIOS, and I haven't been able to plug into another PCIe port.
>
> Any help? Is there some FC12 udev magic I must do?
What happens if you remove the snd_hdsp kernel module and load it again?
/sbin/rmmod snd_hdsp
/sbin/modprobe snd_hdsp
I presume you do have alsa-tools-firmware installed, right?
-- Fernando
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Jan 22 00:15:03 2010
This archive was generated by hypermail 2.1.8 : Fri Jan 22 2010 - 00:15:04 EET