Re: [LAU] oh yoshimi, one more time

david wrote:
> cal wrote:
>> david wrote:
>>> [ ... ]
>>>>> @audio hard rtprio 50
>>>>> @audio soft rtprio 30
>>>> These are rather low. I just looked, and yoshi tries for 55, so these settings
>>>> would fail. You could either bump those settings higher, or adjust the value
>>>> in MusicIO.cpp line 214 down to your level and see if that helps.
>>> I'll boost mine up to go with toshi. It was a copy/paste from someone
>>> else's recommendation.
>> I still get the feeling you're inclined to set them lower than what's
>> consider normal or recommended. The Jack FAQ spells it out pretty
>> simply - <http://www.jackaudio.org/faq>.
>
> Thanks. I changed the hard one to 99. The JACK FAQ didn't say anything
> about the difference between "hard" and "soft", so I set the "soft" one
> to 55. Can't test it right now, will test it later!
>
Almost, but not quite. Somewhere in limits.conf it describes (perhaps cryptically)
how you can set hard and soft at the same time (on the same line) using the '-'.
I don't know of any reason to have hard and soft set different, so as per the jack
faq is about as good as you can get.

cheers.

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Jan 22 00:15:03 2010