Re: [LAU] Questions on New Recording Gear

Ectropic Harmony wrote:
> Mics currently placed about 3 or 4 feet from sound sources.
> XLRs into mixer Ins on the strips.
> Phantom power enabled.
> Gains on strips are set to an uncomfortably high level (over half and
> it's still low).
> Main Mix & the channels' faders are all set to "U".
> Direct Outs from the back of the mixer into the Ins on the Delta 1010.
> Default button settings on back of Delta 1010 (buttons out, allowing "+4")
> Software connections via JACK
> Envy24 running, with levels maxed out (ins and outs).
> Ardour (no current changes in Ardour's mixer's levels, using default)
>

I made this diagram to help me visualize how everything should connect
back when I first set up my studio. Maybe it'll help in your case.

http://s298.photobucket.com/albums/mm262/troutpocket/music/?action=view&current=studiodiagram.jpg

-Scott
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Jan 26 20:15:06 2010