On Tue, Jan 26, 2010 at 6:38 AM, drew Roberts <zotz@email-addr-hidden> wrote:
> On Monday 25 January 2010 23:46:12 Ectropic Harmony wrote:
>> And a Mackie 1642-VLZ3:
>> http://www.mackie.com/products/1642vlz3/
>
> From that link:
>
> 10 studio-grade XDR2™ Extended Dynamic Range mic preamps with:
>
> So you have preamps built into that.
>
> How are you connecting things up?
>
> all the best,
>
> drew
Mics currently placed about 3 or 4 feet from sound sources.
XLRs into mixer Ins on the strips.
Phantom power enabled.
Gains on strips are set to an uncomfortably high level (over half and
it's still low).
Main Mix & the channels' faders are all set to "U".
Direct Outs from the back of the mixer into the Ins on the Delta 1010.
Default button settings on back of Delta 1010 (buttons out, allowing "+4")
Software connections via JACK
Envy24 running, with levels maxed out (ins and outs).
Ardour (no current changes in Ardour's mixer's levels, using default).
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Jan 26 20:15:04 2010
This archive was generated by hypermail 2.1.8 : Tue Jan 26 2010 - 20:15:04 EET