[LAU] Fw: How to make Focusrite Saffire 6 USB works?

From: Pandu Rakimanputra <pandu.rakimanputra@email-addr-hidden>
Date: Sat Feb 20 2010 - 04:12:41 EET

----- Forwarded Message ----
From: Pandu Rakimanputra <pandu.rakimanputra@email-addr-hidden>
To: Clemens Ladisch <clemens@email-addr-hidden>
Sent: Sat, February 20, 2010 9:11:45 AM
Subject: Re: [LAU] How to make Focusrite Saffire 6 USB works?

----- Original Message ----

From: Clemens Ladisch <clemens@email-addr-hidden>
To: Pandu Rakimanputra <pandu.rakimanputra@email-addr-hidden>
Cc: linux-audio-user@email-addr-hidden
Sent: Tue, February 16, 2010 2:47:54 PM
Subject: Re: [LAU] How to make Focusrite Saffire 6 USB works?

Pandu Rakimanputra wrote:
> I've tried to load snd-usb-audio module manually, but the nothing happen.

Then it is not class compliant.

Please show the output of "lsusb -v" for this device

Regards,
Clemens

---------------------------------------------------------------------------------------
This is my lsusb -v:

Bus 002 Device 002: ID 1235:0010 Novation EMS
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 8
  idVendor 0x1235 Novation EMS
  idProduct 0x0010
  bcdDevice 1.00
  iManufacturer 1 Focusrite Audio Engineering
  iProduct 2 Saffire 6USB
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 64
    bNumInterfaces 2
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
      (Bus Powered)
    MaxPower 498mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 0
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 0
      bInterfaceProtocol 0
      iInterface 0
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 1
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 0
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x01 EP 1 OUT
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x024c 1x 588 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0126 1x 294 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 0
      bInterfaceProtocol 0
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x03 EP 3 OUT
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0008 1x 8 bytes
        bInterval 1
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x84 EP 4 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0010 1x 16 bytes
        bInterval 1
Device Status: 0x0000
  (Bus Powered)

I hope i'll help

Thanks for your attention, and sorry for my late reply

Pandu Rakimanputra

      
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sat Feb 20 04:15:03 2010

This archive was generated by hypermail 2.1.8 : Sat Feb 20 2010 - 04:15:04 EET