Re: [LAU] UA-101

From: Colin Fletcher <colin.m.fletcher@email-addr-hidden>
Date: Tue Feb 23 2010 - 19:54:46 EET

Clemens Ladisch wrote:
> Colin Fletcher wrote:
>> I played back a 440Hz sine wave and recorded it back in. Results for
>> 44.1kHz are here:
>>
>> http://www.starlingaudio.co.uk/misc/audiofiles.tar.bz2
>
> There is no recorded data.

Oops, I'm really sorry: I added the wrong file to the archive. If it's
any use, the file I actually intended to upload (still 32-bit floats
recorded through Jack, I'm afraid) is here:

http://www.starlingaudio.co.uk/misc/received.wav.tar.bz2

> Floating-point samples (as used by e.g. Jack) don't show what bits the
> device sent; please use arecord, like this:
>
> arecord -D hw:UA1000 -f S32 -r 44100 -c 10 something.wav

Here's one seconds worth of 12 channels recorded with arecord, with
440Hz of (approximately) sine wave in channels 1, 2, 3 & 4, and silence
in the rest:

http://www.starlingaudio.co.uk/misc/arecord-test.wav.tar.bz2

(There are 12 capture channels on the UA-1000: 1-8 are analogue inputs,
9-10 are the SP-DIF, and 11-12 are a mix of the output signals.)

I hope this is more helpful than my previous try.

Cheers,
Colin.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Feb 23 20:15:02 2010

This archive was generated by hypermail 2.1.8 : Tue Feb 23 2010 - 20:15:02 EET