On Saturday 08 May 2010 13:09:27 Fernando Lopez-Lezcano wrote:
> On Fri, 2010-05-07 at 19:17 -0400, Geoff King wrote:
> > Hello,
> > I have problem that I've been trying to figure out with no luck. The
> > audio interface keeps changing for example:
> >
> > Today: Maudio 24/96 is hw:1 and Midisport 4x4 Anniv is hw:0.
> > Yesterday before reboot: Maudio 24/96 is hw:0 and Midisport 4x4 Anniv is
> > hw:1 etc, back and forth, each reboot...
> > I usually use qjackctl and have to keep changing the presets with
> > settings which is annoying.
> >
> > I would greatly appreciate it if someone could provide me some clues
> > or links on how to fix this?
> >
> > I'm Using Fedora 12 w CCRMA.
>
> While you can force the order with the proper index=xx incantations in
> modprobe.d/ files, that will fail if the computer is booted with a usb
> sound card attached.
>
> The proper fix is to not use the index (a number) when addressing the
> card but use the name of the card. That will never change across
> reboots. So, instead of "hw:0" use "hw:NAME" where NAME is what is shown
> between square brackets in the output of cat /proc/asound/cards
Does this solve the identical sound card problem in any way? Say two identical
usb sound cards at the low and and two delta 1010's a little further up the
chain as examples.
>
> -- Fernando
>
all the best,
drew
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sun May 9 20:15:03 2010
This archive was generated by hypermail 2.1.8 : Sun May 09 2010 - 20:15:03 EEST