Re: [LAU] M-Audio MobilePre USB and Lucid Lynx

Hi

More tests revealed I actually got some output sound but at a very low level
(even if all knobs are turned to max, including the software's output).

Any ideas ?

Who could I turn to ?

thanks

jy

2010/6/23 Jean-Yves Poilleux <jypllx@email-addr-hidden>

> Hi
> I'm not sure this is the right place fot this message but I try anyway...
>
> I've used a M-Audio mobilPre USB soundcard (the older non USB compiant
> version) on Karmic Koala without trouble, using the madfuload 1.2 firmware
> loader. This firmware allows to use this older version of the soundcard on
> Ubuntu. But since I upgraded to Lucid Lynx, it doesn't seem to work anymore.
>
> I started jack using this card and meterbridge showed there was some input
> signal coming in but nothing came out of my speakers.
>
> Anyone encountered this kind of problem ?
>
> Thanks a lot
> jy
>
> here are some logs
>
> "cat /proc/asound/cards"
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0xf0400000 irq 22
> 1 [MobilePre ]: USB-Audio - MobilePre
> M Audio MobilePre at usb-0000:00:1d.2-2, full speed
>
> "aplay -l"
> carte 0: Intel [HDA Intel], périphérique 0 : ALC888 Analog [ALC888 Analog]
> Sous-périphériques: 1/1
> Sous-périphérique: #0: subdevice #0
> carte 0: Intel [HDA Intel], périphérique 1 : ALC888 Digital [ALC888
> Digital]
> Sous-périphériques: 1/1
> Sous-périphérique: #0: subdevice #0
> carte 0: Intel [HDA Intel], périphérique 3 : NVIDIA HDMI [NVIDIA HDMI]
> Sous-périphériques: 1/1
> Sous-périphérique: #0: subdevice #0
> carte 1: MobilePre [MobilePre], périphérique 0 : USB Audio [USB Audio]
> Sous-périphériques: 1/1
> Sous-périphérique: #0: subdevice #0
>
>
>

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Thu Jun 24 12:15:01 2010