Re: [LAU] bristol synths hang

Nick Copeland a écrit :
> > > particular note "hangs" on the synth, and sending note off events
> > > doesn't stop it... I have to restart the program, which makes it
> > > unusable since it happens quite often. Untill now this happenede with
> > > b3, minimoog and dx7.
>
> > I have the same problem here, playing with an usb keyboard.
> > Sometimes you probably have "clicks" (digital saturation) too.
>
> Bristol has had these issues although they were supposed to have been
> iron out in the later releases. The cause of the clicks was largely due to
> voice reassignment with mono synths fixed by implementing a different
> note assignment method (note preference with droning) and the sticky
> notes were due to scheduling issues between threads fixed with a jack
> ringbuffer message passing method.
>
> Now a lot of the distributions are still packaging bristol-0.40 which is
> a couple of years out of date. If you have newer versions then I can
> work on some debuging with you, if you don't have 0.60 then it would
> make sense to try that first.
>
> I cannot rule out other issues but lets start with the versions you have
> and take it from there.
>
> Kind regards, nick.
Hi Nick,

OOPS !
I tell Renato to stay in tune, and run 0.50.1...
Will try to compile 0.60 to follow your advice, and let you know ASAP.
Thanks for replying,
Fred

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sun Dec 12 00:15:04 2010