Re: [LAU] bristol synths hang

From: Nick Copeland <nickycopeland@email-addr-hidden>
Date: Sat Dec 11 2010 - 22:43:24 EET

> > particular note "hangs" on the synth, and sending note off events
> > doesn't stop it... I have to restart the program, which makes it
> > unusable since it happens quite often. Untill now this happenede with
> > b3, minimoog and dx7.

> I have the same problem here, playing with an usb keyboard.
> Sometimes you probably have "clicks" (digital saturation) too.

Bristol has had these issues although they were supposed to have been
iron out in the later releases. The cause of the clicks was largely due to
voice reassignment with mono synths fixed by implementing a different
note assignment method (note preference with droning) and the sticky
notes were due to scheduling issues between threads fixed with a jack
ringbuffer message passing method.

Now a lot of the distributions are still packaging bristol-0.40 which is
a couple of years out of date. If you have newer versions then I can
work on some debuging with you, if you don't have 0.60 then it would
make sense to try that first.

I cannot rule out other issues but lets start with the versions you have
and take it from there.

Kind regards, nick.
                                               

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sun Dec 12 00:15:03 2010

This archive was generated by hypermail 2.1.8 : Sun Dec 12 2010 - 00:15:03 EET