On Tue, 2011-05-31 at 14:29 +0200, Peder Hedlund wrote:
> Quoting Ralf Mardorf <ralf.mardorf@email-addr-hidden-dsl.net>:
>
> > MIDI recordings done by Qtractor, needs to be recorded to Ardour2 audio
> > tracks. Because my old equipment only has got 2 analog stereo IOs, I
> > needed to record one instrument after the other. I couldn't record all
> > instruments at the same time. So even for the rhythm section I needed to
> > record the Kick, the Snare (*lol* yes, a snare), the HiHat, Bass etc.
> > one after the other, hence jitter is much more critical than if you
> > would record all instruments at the same time.
>
> Another workaround (which might save you some time as well if you do
> lots of recordings this way) is to sample each drum and load them into
> Hydrogen.
Now I've got a new card, The RME card has got two analog IOs and I
bought a ADAT device with additional 8 analog IOs, this should enable to
change the work flow. Sampling the drums isn't an option ;).
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue May 31 16:15:05 2011
This archive was generated by hypermail 2.1.8 : Tue May 31 2011 - 16:15:05 EEST