On November 5, 2012 03:48:44 PM you wrote:
> On Mon, November 5, 2012 2:44 pm, Tim E. Real wrote:
> > Apparently, that connection path is called "H-Bus".
> > http://www.staudio.de/kb/english/h-bus/index.html
> >
> > And here's the Windows app to control it, levels and all:
> > http://www.staudio.de/kb/english/el/index.html
>
> Don't see any level control on this page, just routing. The only level
> control is the monitor mixer on the pci card. The converter may have level
> controls available, but it seems this implementation sets them wide open
> or 0db.
Nope they're there alright via the "External mixer" button.
It's not obvious from that page but I think it is stated there.
www.staudio.de/data/DSP24_English.PDF
That manual shows everything - the ADC/DAC front end controls
AND the AC97 controls. Explains all. Take a look.
>
> If I think about my multi-track tape machine, there is no level there
> either (aside from inside for setup). Controlling the level is what the
> mixer or preamp is for. There seem to be a number of pro/semipro IFs that
> don't have digitally controlled levels. My USB box has manual controls
> only, but then they are much more than just level too.
>
> While I am at it :)
> I am using mudita 1.0.4. If I set the patch bay so that hwout1-2 are
> connected to the mixer and use the profile to save that as the first one
> and then change the settings. The first profile doesn't seem to restore
> it. However, if I go back to the stock e24c at 0.6.0 it did at least in
> ubuntu 12.04... now in 12.10 it doesn't work either :)
>
> Ok, restart mudita24 from a terminal.
> on clicking profiles tab I get:
> Cannot open profiles file '~/.envy24control/profiles.conf' ...
> Use current settings.
> when I select a profile:
> You can store this settings to profile no. 1 in file
> '~/.envy24control/profiles.conf' by pressing save button.
> when I hit the save button:
> Cannot find file '/home/joe/.envy24control/profiles.conf'.
> This operation will create a new profiles file
> '/home/joe/.envy24control/profiles.conf'.
> Cannot find program '0'.
Ooh, crud. Look like my automatic searching for the program "alsactl"
has failed.
Er... that is IF you have alsactl installed. Is it there ?
It is required for both envy24control and mudita24, otherwise no profile
saving/loading. I try to auto-locate in md24.
If you have trouble, --h says :
"The program 'alsactl' is automatically found and used.
Environment variable ALSACTL_PROG overrides its location."
cmake does the searching for me. I thought I'd nicked that issue.
Hope it works for you.
Tim.
> You must specify path for '0'.
> Cannot store profile '2' for card '1'.
> Cannot open profiles file '~/.envy24control/profiles.conf' ...
> Use current settings.
>
> Is this fixed in a later version of mudita24? If so it would be nice to
> include it in the 13.04 version of ubuntustudio.
>
> Len
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue Nov 6 12:15:01 2012
This archive was generated by hypermail 2.1.8 : Tue Nov 06 2012 - 12:15:01 EET