Re: [LAU] Behringer UCA202

On 01/23/2013 07:08 AM, Jannis Achstetter wrote:
> Am 23.01.2013 17:31, schrieb Bob van der Poel:
>> On Wed, Jan 23, 2013 at 12:58 AM, Jannis Achstetter
>> <jannis_achstetter@email-addr-hidden> wrote:
>>> Am 22.01.2013 22:26, schrieb Bob van der Poel:
>>>> Anyone with experience using the UCA202? I tried it the other day
>>>> using audacity and found that it played and recorded just fine if it
>>>> was only doing one or the other. But, if I had existing tracks in
>>>> audacity and played those (only 1 stereo) and recorded a 2nd track ...
>>>> the recorded track sounded like it was filtered though a motorboat
>>>> engine (sputter, sputter ...).
>>>>
>>>> I did the recording again directing the output to an existing device
>>>> and all worked fine. So the setup seems to be useable. I am thinking
>>>> that audacity (alsa?) can't read+write to the device?
>>>>
>>>> I'm running Ubuntu 12.04. Didn't have jack running.
>>>
>>> What samplerate are you using? I have problems running the device at
>>> 44.1kHz but it works fine when using 48kHz
>>
>> I was using the default 44.1. I didn't know that one could change the
>> rate on this device. I'll give that a go as well.
>
> It's not a device-setting, rather s.th. you tell your
> audio-software/driver. When using jack you set a fixed sample-rate in
> the server and all audio-apps connected to it will have to use that rate
> (or resample).
> Don't know how it works with other software/driver combinations.

Works fine here with Debian Sid running at 48KHz. Never tried it at 44.1
or without JACK.

-- 
David
gnome@email-addr-hidden
authenticity, honesty, community
http://clanjones.org/david/
http://dancing-treefrog.deviantart.com/
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user