Yes, it happens just plugging the midi in of the FCB1010 to the midi out of
any of the edirol usb devices - the FCB1010 signals its disapproval by
lighting up a period next to the currently selected bank. If I try turning
it off and on, it starts blinking and won't do anything else.
On Tue, Jan 29, 2013 at 3:31 AM, Clemens Ladisch <clemens@email-addr-hidden> wrote:
> Bill Allen wrote:
> > when I hooked the FCB1010 midi in to the UM-2 midi out, the FCB1010
> > goes into error mode. This happens with every one of the edirol
> > devices.
>
> Does this happen *before* you try to actually use the FCB1010?
>
> What differentiates Roland devices from most other MIDI interfaces is
> that they send Active Sense messages. The FCB1010 manual says this is
> supported, and in any case these should be ignored if unsupported, but
> one can never know how buggy the firmware is.
>
>
> Regards,
> Clemens
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Wed Jan 30 04:15:03 2013
This archive was generated by hypermail 2.1.8 : Wed Jan 30 2013 - 04:15:04 EET