Hi Bill,
On Tue, Jan 29, 2013 at 6:18 PM, Bill Allen <bill@email-addr-hidden> wrote:
> Yes, it happens just plugging the midi in of the FCB1010 to the midi out of
> any of the edirol usb devices - the FCB1010 signals its disapproval by
> lighting up a period next to the currently selected bank. If I try turning
> it off and on, it starts blinking and won't do anything else.
I agree with Clemens; this sounds like an active sense message issue.
You can probably confirm this by attaching a MIDI cable to the output
and input ports of the same device, and then using a MIDI monitor
application to monitor the MIDI input of the device.
Do any of your devices allow you to disable active sense messages?
-- Devin Anderson surfacepatterns (at) gmail (dot) com blog - http://surfacepatterns.blogspot.com/ midisnoop - http://midisnoop.googlecode.com/ psinsights - http://psinsights.googlecode.com/ synthclone - http://synthclone.googlecode.com/ _______________________________________________ Linux-audio-user mailing list Linux-audio-user@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Wed Jan 30 08:15:01 2013
This archive was generated by hypermail 2.1.8 : Wed Jan 30 2013 - 08:15:02 EET