Le 15-02-2013 19:03, Len Ovens a écrit :
> Do you have the analog levels turned up (the ice1712 driver seems to
> default to lowest level in pulseaudio)? Also remember that your
> ice1712
> might be hw:1 and not hw:0 if you also have an internal audio IF. In
> pavucontrol (assuming pulseaudio is the default audio server) you
> need to
> select you d1010 as the default output or turn the internal audio
> right
> off. So if pavucontrol shows audio going to the d1010, look at mudita
> in
> the aualog tab and turn up at least DAC 1 and DAC 2 (ADC1 and 2 for
> recording).
OK. first of all, pavucontrol was not installed (which is a Good Thing
since I like lean Linux distros). So I installed it. In the attached
screen shot, the blue bar is the output of vlc playing an audio track.
I must say that I'm not familiar at all with pavucontrol, since I never
used it before, in all those years I used audio in fedora (both playing
audio files and recording with Ardour). I've tried a few things, but
all controls in mudita24 shows '(off)'.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sat Feb 16 04:15:05 2013
This archive was generated by hypermail 2.1.8 : Sat Feb 16 2013 - 04:15:06 EET