On Sat, April 6, 2013 3:18 pm, jonetsu@email-addr-hidden wrote:
> Ardour3 starts all right. Have to test it now. Using the
> phantom-powered mic w/o that works well w/o phantom power.
>
> I got this during install:
>
> Jack Version Check OK (jackdmp version 1.9.9 tmpdir /dev/shm protocol
> 8)
>
> System failed the quick sanity check... Looking for the cause
>
> !!! WARNING !!! - Your system seems to use frequency scaling. This
> can have a serious impact on audio latency. For best results turn it
> off, e.g. by chosing the 'performance' governor.
Performance works well, but I have found any stable frequency (even
800Mhz) works better than having the frequency switch around by cpu load.
This page has an explanation on how to turn it off:
http://wiki.linuxmusicians.com/doku.php?id=system_configuration
-- Len Ovens www.OvenWerks.net _______________________________________________ Linux-audio-user mailing list Linux-audio-user@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Sun Apr 7 04:15:02 2013
This archive was generated by hypermail 2.1.8 : Sun Apr 07 2013 - 04:15:02 EEST