[LAU] MusE: Transforming midi foot controller programs to toggled CC values

This may be of interest to anyone who has a midi foot controller which
 only sends out program change messages, who also has an effects unit or SW
 which can map CC to effect parameters/bypass/etc, and who has a desire to use
 the foot switches like a regular 'stomp box chain' for *TOGGLED* control of
 individual effects.

MusE's "Midi Input Transformator" plugin now allows you to do it.

I pushed a wee mod and some fixes to our SF git repository.
It should appear next release. The repo may change soon.

Here's an example setup which maps Program Changes 0 - 3 to
 CC num = (Program + 10) and CC val = (TOGGLE 0 / 127):

https://dl.dropboxusercontent.com/u/53315356/Patch2ToggledCCTransform.jpeg

The neat thing is, you can KEEP program changes that are above a certain
 number (Program 4 and above in the example), so that the very same foot
 controller can be used to change patches AND control individual effects.
Common foot controllers have four Program switches and two Bank up/down
 switches, so by going to the next Bank (Programs 4 - 7 in the example),
 it can be used to switch Programs, then go back to Bank 0 (Programs 0 -3)
 and the switches act upon the individual effects again.

Note that MusE currently allows mapping midi controllers to any LADSPA
 Rack Plugin parameters *except* the 'Bypass' switch.
So if MusE *itself* is to be the effects unit, properly a 'Bypass' controller
 should be added.
 
Cheers,
Tim.
www.muse-sequencer.org/

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon Sep 2 16:15:02 2013