Re: [LAU] Reconciling K-system and LU R128 Metering

I don't have a technical answer to give you, but if the recommendation
is to work at around -23 dBFS RMS, I would agree that this is
sensible.

If you establish your "0 dB" point at -23 dBFS, you have an amount of
(digital) headroom that's approximately what you would expect in a
traditional (analog) mixing desk -- more than 20 dB above your "0 dB"
point before you completely run out of voltage rail.

The only problem is that most DAWs use a default style of waveform
display which makes it hard to even tell there's a signal at that
level.... you have to get up to about -10 dBFS to be able to see the
shape of the signal's dynamics...

Thanks,
Bill Gribble

On Thu, 2014-01-23 at 07:07 -0800, Reuben Martin wrote:
> I'm trying to work out how K-system metering works in relation to the new LU
> R128 standard, and can't really find anything definitive on it.
>
> R128 standard sets the target volume at -23 LUFS, but is that just for TV
> broadcast, or is that for everything? That is a tremendous amount of dynamic
> range available if that applies to radio/music broadcast as well.
>
> I guess my question is in 2 parts:
>
> Are there different LUFS targets for different material, similar to how K-System
> has different dynamic ranges for different material? If so, what are they?
>
> Is the target LUFS level(s) what I use when calibrating 85 dB speaker levels,
> or is that something different.
>
> -Reuben
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-user

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Thu Jan 23 20:15:02 2014