On Thu, Jan 23, 2014 at 9:41 AM, Bill Gribble <grib@email-addr-hidden> wrote:
> I don't have a technical answer to give you, but if the recommendation
> is to work at around -23 dBFS RMS, I would agree that this is
> sensible.
>
> If you establish your "0 dB" point at -23 dBFS, you have an amount of
> (digital) headroom that's approximately what you would expect in a
> traditional (analog) mixing desk -- more than 20 dB above your "0 dB"
> point before you completely run out of voltage rail.
>
>
One of the things I'm not sure of is if I actually master things to the
R128 level. It may be that I go ahead and use K-System-14 (or 20) for the
mastering part, and that the R128 level is just a reference for how the
levels will be normalized for broadcast usage.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Jan 24 04:15:02 2014
This archive was generated by hypermail 2.1.8 : Fri Jan 24 2014 - 04:15:02 EET