On 20 April 2014 at 7:54, "F. Silvain" <silvain@email-addr-hidden> wrote:
> Kevin Cosgrove, Apr 20 2014:
> ...
> > I'm trying to figure out how to interconnect the *MIDI* of the following:
> >
> > - M-Audio Delta 1010 hardware MIDI ports
> > - Mackie Control Universal hardware MIDI ports
> > - Alesis QS8 hardware synth
> > - a2jmidid software MIDI interface
> > - Ardour jack-MIDI ports
> >
> > What can you folks advise?
> Hey Kevin,
> I've got the same card and I use MIDI everytime I work with my system.
> Why do you use a2jmidid, when JACK has its own option?
> jackd ... -Xseq
> Valid for JACK1 and JACK2 (JACKmp).
The Mackie above is a control surface. I want to use it with Ardour.
Here are some instructions for that. The 1st link references the
2nd, which references the 3rd.
http://manual.ardour.org/using-control-surfaces/devices-using-mackielogic-control-protocol/
http://manual.ardour.org/setting-up-your-system/setting-up-midi/midi-on-linux/
That last link says to "uncheck the Misc > Enable ALSA Sequencer support"
which is the same thing as avoiding "-Xseq". After going through that,
and going with "a2jmidid -e" then my Behringer BCF2000 control surface
worked just fine.
But, the Mackie has no USB port, only MIDI ports, and I have not been
able to get anything Linux to talk to it.
> I don't have an external mixer (I assume the Mackie is one)
> but I have synths. Depending on the software I'm running I use
> jack_connect or any patchbay I like or the software itself
> offers a way to connect to a jACK port directly. I've never
> used Ardour, so no help there. If there is a particular
> problem along the way it will be easier to answer. I hope this
> helped some.
See my above Ardour <--> MIDI <--> Mackie question.
Thanks...
-- Kevin _______________________________________________ Linux-audio-user mailing list Linux-audio-user@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Mon Apr 21 04:15:02 2014
This archive was generated by hypermail 2.1.8 : Mon Apr 21 2014 - 04:15:02 EEST