On Fri, 9 May 2014 11:17:00 +0000
Fons Adriaensen <fons@email-addr-hidden> wrote:
> On Fri, May 09, 2014 at 11:54:23AM +0200, Ralf Mardorf wrote:
> > On Fri, 2014-05-09 at 09:13 +0000, Fons Adriaensen wrote:
> > > To be properly grounded, the connection to ground must have
> > > sufficiently low resistance
> >
> > To get rid of ground loops protective grounding can be done through a
> > capacitor.
>
> Certainly not. Just read the text you posted.
>
> It says that some equipment may allow to separate signal ground
> and protective ground, and that in that case the two may remain
> connected via a capacitor which may improve HF shielding.
>
> It certainly doesn not say that you can disconnect protective
> ground, on the contrary it does say that you must not do that.
Beat me to it! It's quite scary what people think is 'safe enough' :(
-- Will J Godfrey http://www.musically.me.uk Say you have a poem and I have a tune. Exchange them and we can both have a poem, a tune, and a song. _______________________________________________ Linux-audio-user mailing list Linux-audio-user@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-userReceived on Sat May 10 00:15:01 2014
This archive was generated by hypermail 2.1.8 : Sat May 10 2014 - 00:15:02 EEST