Re: [LAU] howto get pcmcia firewire card working

From: Len Ovens <len@email-addr-hidden>
Date: Sat Jun 28 2014 - 02:36:55 EEST

On Fri, 27 Jun 2014, Wayne DePrince Jr. wrote:

>     thanks for the info.  i guess everything is going USB these days.  but
> can USB 3 perform as well as FW?

Unless you know different, The last I heard there are no USB3 Audio
interfaces. Many people feel there is nothing to be gained over USB2 for
audio.

_If_ you can find a usb port that has it's own irq and that is not used
(via an internal usb hub) for any other bits (webcam, wifi card, touchpad,
etc.) then very good performance can be had. Up to about 18 channels plus
midi at 48k/24bit... fewer at 96 (because normally 8 of the ports are
adat). There are some better FW units (64 channels?) with the right FW IF.

For a reality check on this. The only computers where USB is the only
options are laptops and smaller computers and 18 i/os already require a
BOB bigger than the computer. For something that requires more channels
than 8 it is not that much more trouble to cart around a desktop box... or
rackmount unit. Then other options exist anyway. A desktop MB _can_ be
cooled better than a laptop and quieter too. (though many desktops are
actually louder)

--
Len Ovens
www.ovenwerks.net

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sat Jun 28 04:15:02 2014

This archive was generated by hypermail 2.1.8 : Sat Jun 28 2014 - 04:15:02 EEST