Re: [LAU] hdsp firmware load problem

On Wed, Oct 15, 2014 at 1:59 PM, raf <rmouneyres@email-addr-hidden> wrote:

> >> From: Iain Mott <mott@email-addr-hidden>
> >> I tried another slot (there are only 2 pci slots on the mother board),
> >> but the same thing happens. It required about 3 boots to get the
> >> firmware to load. I hope it's not a problem in the RME PCI card itself.
> >
> > You could try checking whether the PCI card is detected in the cases
> where
> > the firmware is not loaded. It is PCI and not PCIe?
> > Compare the output of lspci in the good vs. failing case and verify that
> > the PCI card is detected, because the driver will never load and attempt
> > to find the external interface if the PCI part of the interface is not
> > detected.
>
> that's a good spot Chris, I tend to have that very same problem from time
> to time with a HDSP PCI card, i suspect my PCI extender to move in the rack
> and the card sometimes not being detected at all on startup.
> It also mean I have never find a real solution to this because i suspect
> the hardware, so sometimes i open the rack, move the card, and reboot.
> Lain, if you're in the same situation, make sure the card is properly
> inserted and aligned in the pci slot.
>

it may or may not apply to you, but this is required reading:

http://www.rme-audio.de/en_support_faq.php?page=content/support/en_hdsp_pci

i just "lost" my HDSP card, which was a rev 3. no idea if it caused by the
same problem - it had been working in the same computer for several years.

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Thu Oct 16 00:15:01 2014