On Thu, 19 Feb 2015 05:00:42 +0100, Ralf Mardorf wrote:
>On Wed, 18 Feb 2015 20:34:56 -0700 (MST), Jonathan E. Brickman wrote:
>>Of course, I could just use male-to-female extenders instead of hubs.
>>I will probably do this in the short term, until I have better :-)
>
>"UCE60 lets you locate your USB device or hub up to 60m (198 ft) from
>you computer, overcoming the typical USB cable limitation. It
>conditions the USB signals to communicate up to 60m using low-cost Cat
>5/Cat 5e/Cat 6 cable." -
>http://www.reichelt.de/USB-Kabel/ATEN-UCE60/3/index.html?&ACTION=3&LA=2&ARTICLE=135895&GROUPID=6099&artnr=ATEN+UCE60
If your device doesn't have MIDI sockets, there's also
http://www.kentonuk.com/products/items/utilities/usb-host.shtml
I don't know if USB to CAT or USB to MIDI does add delay or jitter.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Feb 20 00:15:07 2015
This archive was generated by hypermail 2.1.8 : Fri Feb 20 2015 - 00:15:08 EET