On Thu, 07 May 2015 20:53:03 -1000, david wrote:
>On 05/04/2015 11:41 PM, Chris Bungue wrote:
>> I know it' a little bit out of topic...
>>
>> 2015-05-05 9:26 GMT+02:00 Ralf Mardorf:
>>
>> Only very old PC monitors are slow enough for usage with the
>> Atari ST...
>>
>> you can use a normal TFT 4:3 monitor in hi-res mode for the old
>> Atari St series. The Falcon run in every resolution with a TFT
>
>IIRC from my days when I sold Atari STs and Commodore Amigas - the
>ST's Monochrome ran a 110Hz refresh rate that made the image look as
>rock solid and steady as if someone had painted it on the wall?
Issues are caused by the horizontal refresh rate, but I might be
mistaken, monochrome might work with newer monitors too.
Vertical refresh rate 72 Hz monochrome and 50 or 60 Hz colour.
Horizontal refresh rate 31.5 Khz and 15.75 Khz.
Resolution 640 x 400 and 640 x 200 / 320 x 200
I replied too the list as a general information for Atari owners, but
please continue off-list.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri May 8 12:15:01 2015
This archive was generated by hypermail 2.1.8 : Fri May 08 2015 - 12:15:01 EEST