Re: [LAU] Interfacing an electric guitar

From: Robert Edge <thumbknucklerocks@email-addr-hidden>
Date: Sun Jul 19 2015 - 19:47:08 EEST

Well, the mic pre on that card sounds like shit, so no I would not consider
that obvious at all. I go out of my way to only use the line inputs on my
1010LT.

But whatever, best of luck.

On Sun, Jul 19, 2015 at 12:44 PM, fred <f.rech@email-addr-hidden> wrote:

> Of course the DIbox XLR output is used!
>
> ------------------------------
> *De :* Robert Edge <thumbknucklerocks@email-addr-hidden>
> *À :* fred <f.rech@email-addr-hidden>
> *Cc :* "linux-audio-user@email-addr-hidden" <
> linux-audio-user@email-addr-hidden>
> *Envoyé le :* Dimanche 19 juillet 2015 18h13
> *Objet :* Re: [LAU] Interfacing an electric guitar
>
> When going direct from guitar to computer you will want to be using the
> XLR inputs on the 1010LT, probably with the jumpers in the highest gain
> position. The output of an electric guitar is quite low and you are going
> to lose even more with the insertion loss through the passive direct box.
> I don't think it will drive the RCA jacks in a satisfactory manner.
>
> re using a guitar amp in the chain: I've never had much luck with the
> headphone jacks on. If you have a line out or effects send they might be
> worth trying instead.
>
>
>
> On Sun, Jul 19, 2015 at 11:06 AM, fred <f.rech@email-addr-hidden> wrote:
>
>
>
>
> ------------------------------
> *De :* "jonetsu@email-addr-hidden"
>
> Hello all,
>
> Just got an electric guitar. First time. Now putting on a new set of
> strings.
>
> Got a 1/4" wire and a passive direct box that's already used for a
> Wavedrum. Got also a small guitar amp with an headphone out jack, as
> an option. The audio card is a M-Audio 1010LT.
>
> Can I simply take the 1/4" wire from the passive direct box and connect
> it to the guitar ? I believe there's a guitar processing app out there
> called something like rackarrack or such. Does this work through jackd
> as in doing the audio routing using qjackctl ?
>
> Alternatively if I want the amp's sound and processing, I can simply
> use the amp's headphone out, although I'd like to try the computer
> based only interface and processing.
>
> Cheers.
>
>
> Hi happy Canadian guitarist :)
>
> IMHO, best chain for the hardware you describe is
> guit>DIbox>1010LT>QjackCtl>Guitarix>QJackCtl>1010LT>guit amp
> if you only want to play guitar with Guitarix FX & modélisation?
>
> TIP: don't forget to put a hard limiter before Guitarix out, this (very
> nice)
> software (available in french)))) is able to produce very hard
> level...
>
> HTH, have fun!
> Fred
>
>
>
>
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-user
>
>
>
>
>

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Sun Jul 19 20:15:04 2015

This archive was generated by hypermail 2.1.8 : Sun Jul 19 2015 - 20:15:04 EEST