Re: [LAU] [darkice] (SOLVED) Re: Cant Get Creative E-MU USB audio interface to work

OK, got it working, used .~/asoundrc

    pcm_slave.sl3 {
        pcm "plughw:1,0"
        channels 2
        rate 44100
    }

    pcm.complex_convert {
        type plug
        format S16_LE
        slave sl3
    }

And the darkice.cfg input section is

    [input]
    device = plughw:1,0 # Alsa soundcard device for the
    audio input (barenger)
    sampleRate = 44100 # sample rate in Hz. try 11025, 22050 or
    44100
    bitsPerSample = 16
    channel = 2 # channels. 1 = mono, 2 = stereo

Ben

On 01/04/2016 11:03, Niels Dettenbach wrote:
> Am Freitag, 1. April 2016, 10:53:03 schrieb Ben Edwards:
>> OK, just tried that
> ...i've figured out that we have a few 24bit consumer interfaces (USB) too
> running with darkice.
>
> so it *should* work...
>
> could you try pls:
>
> device = plughw:0
> or
> device = plughw:1
>
> instead?
>
> I had to use this instead of the
> device = hw:0,0
>
> If that did not help, i would try to disable realtime for first until it is
> working (just as a shot)...
>
> hth

-- 
*Ben Edwards, Video Editor/Colorist & Cameraman*
w:www.funkytwig.com t. 01179 118 144 m.:07773 02 44 82
skype:funkytwig twitter:@funkytwig
PGP Public key available from pgp.mit.edu
If you are a freelancer FreeAgent is a great system to do your accounts,
if you use http://www.freeagent.com/?referrer=42j4d743
(referral code is 42j4d743) you get 10% off each month.

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Fri Apr 1 16:15:02 2016