On Tue, 2 May 2017 07:27:24 -0700 (PDT)
Len Ovens <len@email-addr-hidden> wrote:
> On Tue, 2 May 2017, Jeanette C. wrote:
>
> > May 1 2017, Ralf Mardorf has written:
> > ...
> > resp. the missing
> >> mixing console is a little bit unique,
> > ...
> > I have a feeling that most people recommend a mixing desk, but going
> > directy into the computer is very convenient and saves space. :) Yea, I
> > do lack a nice hardware channel strip, but a nice one would cost me. :)
>
> I have a mixer in my "Studio". Really, it comes from days gone by when I
> had a Fostex R8 tape machine. I still use it for the mic preamps
[ snip ]
>
> If I was starting over... a mixer would be much farther down the list.
I've only recently removed the mixer from my primary workstation. For the
most part, it's been replaced by a Mackie passive Big Knob - a big volume
knob between my Delta 1010's outputs and my powered monitors. I've
always preferred hardware volume controls, as there'd be times something
would happen, like using a plugin that unexpectedly ups the gain by a
zillion dB, causing a horrific howl. Rather than fumble with the mouse
and look for a control, I want the big knob or fader that I can pull down
NOW to make the bad noise stop.
Right now I'll do overdubbing at that station with a little ART preamp,
but I'm considering getting one nice preamp for the small rack that as the
1010 I/O unit and a patchbay.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh@email-addr-hidden
Without deviation from the norm, "progress" is not possible. - FZappa
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Tue May 2 20:15:02 2017
This archive was generated by hypermail 2.1.8 : Tue May 02 2017 - 20:15:02 EEST