Re: [LAU] [Off topic] DIY Theremin

On Sun, 30 Dec 2018 19:00:04 +0100, Dominique Michel wrote:
>For the theremin, some provide MIDI Out and some Moog models have CV
>out connectors for the volume and the pitch. This CV out solution seam
>to be the best one when used with the thereminator:
>https://www.wavelicker.com/en/thereminator/

Unfortunately there seems to be no English information about the A-178
Theremin Control Voltage Source on the Doepfer website. But the German
page provides some nice pictures (and dead links). There's a note in
English: "It's not possible to connect the antenna via an additional
cable to the antenna socket. Antenna and hand form a variable capacitor
with a very small capacity in the pico Farad range. The electronics of
the module is puzzled out just for this capacity range. If a cable is
added the capacity range changes totally and the module will no longer
work ! But it's possible to mount the complete module with antenna at
the desired position, e.g. into a small case that holds one or two of
the modules. For this a longer bus cable is required."

http://www.doepfer.de/a178.htm

-- 
pacman -Q linux{,-rt{,-securityink,-cornflower,-pussytoes}}|cut -d\  -f2
4.20.arch1-1
4.19.10_rt8-0
4.19.8_rt6-0
4.19.5_rt4-0
4.18.16_rt9-1
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-user