Subject: Re: [linux-audio-user] [Fwd: Re: [ardour-dev] Ardour, IRQs and xruns]
From: Patrick Shirkey (pshirkey_AT_boosthardware.com)
Date: Mon Sep 16 2002 - 21:28:54 EEST
Mark Knecht wrote:
> I think Patrick has two USB controller, or at least that's the way I read
> his message. If cat /proc/interrupts gives him the info he wants, then
> that's clearly a good way to go.
Actually I had to look at lspci -v and lsusb and check
00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB
(Hub A) (rev 04) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 2440
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at cc00 [size=32] <<<<<----- here (cc00)
Then compare that to the info from the Hub controller in lsusb
Bus 001 Device 001: ID 0000:0000 Virtual Hub
this line has the answer:
iSerial 1 cc00
I find that the hub which is running on irq 11 is the same one I have
attached my audio card to. So no worries.
-- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur http://www.boosthardware.com http://www.boosthardware.com/LAU/guide/ ========================================"Um...symbol_get and symbol_put... They're kindof like does anyone remember like get_symbol and put_symbol I think we used to have..." - Rusty Russell in his talk on the module subsystem
_______________________________________________ linux-audio-user mailing list linux-audio-user_AT_music.columbia.edu http://music.columbia.edu/mailman/listinfo/linux-audio-user
This archive was generated by hypermail 2b28 : Mon Sep 16 2002 - 21:49:31 EEST