Re: [linux-audio-user] saving mixer settings on Mandrake 9.1

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: Re: [linux-audio-user] saving mixer settings on Mandrake 9.1
From: Allan Klinbail (allank_AT_labyrinth.net.au)
Date: Fri Jun 13 2003 - 20:30:40 EEST


On Sat, 2003-06-14 at 02:44, Patrick Shirkey wrote:
> Allan Klinbail wrote:
> > Hi
> >
> > I'm getting annoyed that every time I restart the machine (or possibly
> > just ALSA) I need to reconfigure my mixer settings. (especially for my
> > delta 66 as I like to have the adc, dac settings setup so that the
> > meters on the computer match those of my mixing desk and hardware
> > compressors.. unity gain should be the same everywhere)
> >
> > I'm sure this is just a matter of having the right SysV init script. My
> > confusion is that Mandrake has 3 scripts for sound.. it has alsa,
> > alsasound and sound.
> >
> > Does anyone know which is the right one to be using to ensure that my
> > mixer settings are saved?
> >
>
> This is not the answer you want but, if you only need to save them at a
> default volume then you can use:
>
> alsactl store <card>
>
> there is a way to do it in your modules.conf file so that everytime you
> load the modules it restores the default setting.
>
> ex.
>
> alias snd-card-0 snd-cmipci
> options snd-cmipci id="first" # snd_enable_midi="1"
> post-install snd-cmipci /usr/sbin/alsactl restore
> pre-remove snd-cmipci /usr/sbin/alsactl store

Hey, it may not have been the exact answer I was looking for.. However
it's a better one anyway, solves the problem and is not distro specific

thanks muchly

-- 
Allan Klinbail <allank_AT_labyrinth.net.au>


New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Fri Jun 13 2003 - 20:45:50 EEST