Subject: Re: [linux-audio-user] Re: HDSP Firmware
From: Gustavo Zamorano S. (gzsuniq_AT_cableonda.net)
Date: Sun Sep 21 2003 - 21:11:40 EEST
I had that problem. First, no devices were created. Remember to run
./snddevices from de alsa-driver??? dierctory.
Second, the driver that comes with Red Hat was installed. I had to
remove old modules.
Third: No sound server should be running..
I found some info here> http://www.rme-audio.com/english/linux/alsa.htm
GZS
BrbrOfSvl_AT_aol.com wrote:
> Thanks for your suggestions...
> When I run "alsaconf" it finds the HDSP just fine, but when it tries to bring up the volume, I get this message:
>
>
> Starting sound driver snd-hdsp Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: init_module: No such device
> /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: insmod /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o failed
> /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: insmod snd-hdsp failed
> [FAILED]
> Starting sequencer [ OK ]
> Restoring sound driver settings /usr/sbin/alsactl: load_state:1121: No soundcards found...
> [FAILED]
>
>
> After that an lsmod shows no snd-hdsp. Any idea what could cause this or how to go about solving it?
>
> Thanks,
>
> Matt Barber
>
>
--
This Message is sent from my Red Hat 8.0 Linux server
Machine Registration number 205692 at http://counter.li.org/
.-. Gustavo Zamorano S.
.-. | Registered Linux user number 320898
.-. | | at http://counter.li.org/
This archive was generated by hypermail 2b28 : Sun Sep 21 2003 - 21:25:02 EEST