Subject: Re: [linux-audio-user] ... like an old vinyl
From: iriXx (m_AT_irixx.org)
Date: Fri Oct 24 2003 - 04:52:23 EEST
has anyone here seen Izotope Vinyl - its a DirectX plugin for Windoze.
has a very witty interface too - but i think cloning something like this
for the Ladspa plugin set might be in order?....especially if its not so
hard to do....
m~
Sascha Retzki wrote:
>
>
> --- Anahata <anahata_AT_treewind.co.uk> wrote:
> On Wed, Oct 22, 2003 at 10:14:58PM -0500, Reuben Martin wrote:
>
>>First: Using an equalizer, kill all frequencies below ~600 and above
>>~2k. Use a graphic EQ for this. (The two values are just examples, you
>>can play with both frequencies to get the desired sound you're looking
>>for.)
>>
>>Second: get a recording of the inside blank track that comes after the
>>last song of a noisy record. Loop this noise and mix it over top of
>>the song once you've done the band pass filter from step one.
>>
>
> That's a bit drastic for vinyl - more like an acoustically recorded
> 78rpm from about 1920. Those were pressed on shellac, not vinyl.
>
> The priciple's about the same, though - add a few random background
> ticks and clicks, a bit of white noise as many vinyl discs had tape
> noise from the master, possibly a bit of distortion on peaks if you want
> it to sound like a worn record/stylus, and also some gentle frequency
> variation at 0.5 Hz (for 33 1/3 rpm) to simulate a less-than perfect
> turntable or warped record.
>
> I'm sure it can be done with Linux tools...
>
--|\ _,,,---,,_ ZZZzz /,`.-'`' -. ;-;;,_ HTTP 503: Too Busy |,4- ) )-,_. ,\ ( `'-' '---''(_/--' `-'\_) fL
"Do not meddle in the affairs of cats, for they are subtle and will piss on your computer." -- Bruce Graham
Musicians say No to RIAA Persecution and Prosecution of Music Lovers!
Sign the petition at http://www.copyleftmedia.org.uk/justsayno/
.::. www.iriXx.org .::. www.copyleftmedia.org.uk .::.
This archive was generated by hypermail 2b28 : Fri Oct 24 2003 - 04:54:51 EEST