Subject: Re: [linux-audio-user] midi troubles
From: Eric Dantan Rzewnicki (eric_AT_zhevny.com)
Date: Sun Jan 04 2004 - 02:13:54 EET
I'm trying to get midi working with my ymfpci based card ... I didn't
know I had to specify the mpu_port in my module options. Does anyone
know what value I need to pass? or how I can find out?
I guess I need to add something like:
options snd-ymfpci mpu_port=0x???
currently I just have this:
#sound specific modules
alias char-major-116 snd
alias snd-card-0 snd-ice1712
alias snd-card-1 snd-ymfpci
tim hall wrote:
> > Last thing, I can hear sound without difficulty : when X runs afeter
> > boot, I hear the little jingle witch comes with
>
> Basically you must instruct modprobe to connect up the MIDI port (usually
> 0x330) when it inserts the soundcard driver.
> I assume you have checked here for details, no?
> http://www.alsa-project.org/alsa-doc/index.php3
>
> My /etc/alsa/modutils/0.9 file looks like this
> (It probably will work for you, but I'm guessing)
>
> ---------------------------------------------------------------
> alias char-major-116 snd
> alias snd-card-0 snd-intel8x0
> options snd-intel8x0 mpu_port=0x330 index=0
> options snd major=116 cards_limit=1 device_mode=0660
> alias char-major-14 soundcore
> alias sound-slot-0 snd-card-0
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
> ----------------------------------------------------------------
> If you are using mdk-9.2 then your modules directories may be set up
> differently from Debian (which is what I'm using). Under Debian you then
> perform an 'update-modules'. You may have to do something different from this.
> Configuring your mpu401 (or whatever MIDI port) should sort this. Rosegarden4
> does work, it's not quite as immediate as MusE, but makes up for this in
> other ways ...
>
This archive was generated by hypermail 2b28 : Sun Jan 04 2004 - 02:17:34 EET