Re: [linux-audio-user] suggestions for USB/serial/PCMCIA MIDI interfaces ?

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: Re: [linux-audio-user] suggestions for USB/serial/PCMCIA MIDI interfaces ?
From: Mark Knecht (markknecht_AT_comcast.net)
Date: Mon Oct 04 2004 - 07:15:08 EEST

On Sun, 2004-10-03 at 14:51, Pedro Lopez-Cabanillas wrote:
> On Sunday 03 October 2004, Mark Knecht wrote:
> > <SNIP>
> >
> > > Using this program is very easy. You only need to copy some files from
> > > your windows driver into the directory where you unpacked the sources,
> > > and run make install on it.
> >
> > <SNIP>
> >
> > These files ARE the firmware...
>
> No. Not the pure firmware, and not in the format that fxload needs to upload
> it to the device. These files coming from the windows drivers, and needed for
> the midisport loader are:
> MidiSport 1x1: USB11LDR.SYS
> MidiSport 2x2: USB22LDR.SYS
> MidiSport 4x4: USB44LDR.SYS
> MidiSport 8x8: USB88LDR.SYS
> Keystation/Oxygen: UKS11LDR.SYS
>
> The windows SYS files are PE format files. The extractor program finds the
> binary firmware inside the SYS files, and converts it to the IHX
> (http://www.cs.net/lucid/intel.htm) text format needed by the program
> 'fxload' (the same program that you already use to upload the ezusbmidi
> firmware).
>
> You have the sources of the extractor here:
> http://cvs.sourceforge.net/viewcvs.py/usb-midi-fw/midisport-firmware/
>
> Regards,
> Pedro
>

OK, a rose ...

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Mon Oct 04 2004 - 07:24:24 EEST