[linux-audio-user] question for Delta 1010 users

I bought a Delta 1010, which works very well. But there's one strange
thing:
I let the system running the whole day and, when i came back home this
evening, the power LED on the 1010 was turned off and the card was not
passing any signal in or out. The OS was seeing it, i was able to run
envy24control, but couldn't hear anything. Rebooting the system didn't
help.
After power-cycling the system, the card works fine again.
Cause? Remedy?

Also, is your card running hot like mine does? (epecially the left-hand
side of the box)

-- 
Florin Andrei
http://florin.myip.org/