On 5/31/07, nescivi <nescivi@email-addr-hidden> wrote:
> After fiddling with it quite a bit, I got it to work with the .asoundrc pasted
> below in my homefolder.
Thanks for posting ;-) very useful !
> The system sees the card at startup and loads the firmware properly, and I can
> use the card without any problems.
>
> The only problems that occur are when I insert the PCMCIA card later with the
> box attached. Then the system hangs. I.e. I need to have the card inside and
> the box attached at startup, it seems.
Very strange...do you get the same results with pcmciautils ?
On my side, it hangs when I remove the card (without prior kernel
module removal)
__________________
Marc-Olivier Barre,
Markinoko.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
Received on Fri Jun 1 00:15:02 2007
This archive was generated by hypermail 2.1.8 : Fri Jun 01 2007 - 00:15:02 EEST