Re: [LAU] Boss GT-10

From: Pedro Ferreira <ilzogoiby@email-addr-hidden>
Date: Thu Jul 31 2008 - 11:28:11 EEST

It works perfectly with fxfloorboard, except for some details that I
guess that are problems of fxfloorboard itself.
As for the curiosity question, I have no idea. But I'm pretty sure
that Clemens knows it.

Cheers,

Pedro

On Thu, Jul 31, 2008 at 12:32 AM, Tinco Andringa <mail@email-addr-hidden> wrote:
>
> Awesome thanks, that works :D So that only leaves my curiosity question, anyone got a clue? Is this patch btw on track for inclusion in the driver? I noticed the vendor info stuff wasn't in it so it doesn't look like a realy driver patch, I added vendor info in my patch. I will test tomorrow if it works with the floorboard software to see if it works with the midi stuff too.
>
> Cheers,
> Tinco
> ----------------------------------------
>> Date: Wed, 30 Jul 2008 23:01:05 +0100
>> From: ilzogoiby@email-addr-hidden
>> To: mail@email-addr-hidden
>> Subject: Re: [LAU] Boss GT-10
>> CC: linux-audio-user@email-addr-hidden
>>
>> Hello,
>> The "No mixer elems found" error is normal. A for the rest, I guess
>> you are not correctly selecting the device for recording.
>>
>> arecord --device=default:CARD=GT10 -t wav -f s16_le -r 44100 -c 2 test.wav
>>
>> works for me :)
>>
>> Good luck,
>>
>> Pedro
>>
>> On Wed, Jul 30, 2008 at 4:10 PM, Tinco Andringa wrote:
>>>
>>> Hello,
>>>
>>> I am a bit new to this so please bear with me. I'm trying to get my Boss GT-10 to work on my (arch) linux install.
>>>
>>> I added the patch that was suggested in the post I reply to to my usbquirks.h and compiled alsa using the guide on this site: http://www.alsa-project.org/main/index.php/Matrix:Module-usb-audio with as only difference that I configured with '--with-cards=all'.
>>>
>>> After this my BOSS GT-10 was recognised by linux and I am able to play sound over it using aplay. Recording however seems not to work. When I run arecord -L it shows all three of my audio cards, including the bossgt, but when I do alsamixer -c 2 it gives the following error: No mixer elems found. Using a command like arecord -d 5 -t wav test.wav just gives me the sound recorded by the microphone in another soundcard. It could be that it's just a matter of using -D to select the right PCM, but I'm not sure how to find the right PCM.
>>>
>>> I suspect this is the reason I cannot record, do you have any idea what goes wrong? Another question more out of curiosity, why does the patch specify USB_DEVICE(0x0592,0x00da) whilst the usb device as listed by lsusb has id 0x00db?
>>>
>>> If I need supply any specific information
>>>
>>> With kind regards and gratitude for the patch,
>>> Tinco Andringa
>>>
>>> --- In reply to: ---
>>> Clemens Ladisch cladisch at fastmail.net
>>>
>>> Thu Jul 24 12:04:48 EDT 2008
>>>
>>> edro Ferreira wrote:
>>>> OK, I've added the output as an attachment :).
>>>
>>> Sorry for the delay.
>>>
>>> Please try adding the entry below anywhere in sound/usb/usbquirks.h
>>> and recompile the driver:
>>>
>>>
>>> {
>>> /* BOSS GT-10 */
>>> USB_DEVICE(0x0582, 0x00da),
>>> .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
>>> .ifnum = QUIRK_ANY_INTERFACE,
>>> .type = QUIRK_COMPOSITE,
>>> .data = (const struct snd_usb_audio_quirk[]) {
>>> {
>>> .ifnum = 0,
>>> .type = QUIRK_AUDIO_STANDARD_INTERFACE
>>> },
>>> {
>>> .ifnum = 1,
>>> .type = QUIRK_AUDIO_STANDARD_INTERFACE
>>> },
>>> {
>>> .ifnum = 2,
>>> .type = QUIRK_MIDI_FIXED_ENDPOINT,
>>> .data = & (const struct snd_usb_midi_endpoint_info) {
>>> .out_cables = 0x0001,
>>> .in_cables = 0x0001
>>> }
>>> },
>>> {
>>> .ifnum = -1
>>> }
>>> }
>>> }
>>> },
>>>
>>>
>>>
>>> HTH
>>> Clemens
>>>
>>> _________________________________________________________________
>>> Express yourself instantly with MSN Messenger! Download today it's FREE!
>>> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>>> _______________________________________________
>>> Linux-audio-user mailing list
>>> Linux-audio-user@email-addr-hidden
>>> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
>>>
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today it's FREE!
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
>
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Received on Thu Jul 31 12:15:02 2008

This archive was generated by hypermail 2.1.8 : Thu Jul 31 2008 - 12:15:02 EEST