Re: [LAU] [Bulk] Re: control surfaces

The truth is I've never tried to clean the encoders. I will do that. Thanks for the advice.I don't know why (maybe the same problem with dust on the encoders?) but sometimes, also the display numbers change without touching anything. The Phantom of the bcr...

> From: ralf.mardorf@email-addr-hidden
> To: linux-audio-user@email-addr-hidden
> Date: Wed, 10 Sep 2014 22:27:52 +0200
> Subject: Re: [LAU] [Bulk] Re: control surfaces
>
> On Wed, 2014-09-10 at 18:49 +0200, Nacho - wrote:
> > Also own one BCR-2000 and I do not recommend it. Some of the first row
> > knobs now don't work properly on my unit and has never left my room.
> > It does not seem a reliable device for me, It is tempting, cheap and
> > with all that rotary encoders, but...
>
> I don't own those Behringer control devices, but all switches (mute, sub
> group routing etc.) of my Behringer analog mixer are defect. When unused
> the mixer is covered with a plastic sheet and the switches were seldom
> used, they get broken 2 or 3 years after I bought it. Non of the faders
> suffers from dust, faders and potentiometers are still ok and it's much
> older than 3 years now. I didn't test Kontakt 60 to clean, Kontakt WL to
> sluice out and Kontakt 61 to lubricate. Btw. using Kontakt 61 aerosol
> for faders does avoid fader death after cleaning. The cans lose pressure
> very soon, perhaps I should open the cans and spray it with my
> airbrush :D. Anyway, did you test cleaning the knobs using cleaning
> aerosols and after cleaning it a protection aerosol?
>
>
> _______________________________________________
> Linux-audio-user mailing list
> Linux-audio-user@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-user
                                               

_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Thu Sep 11 04:15:02 2014