On 05.10.2015 01:25, Ben Burdette wrote:
> Unfortunately my system (bananapi with armv7 processor) doesn't have a
> bios so I can't deactivate the onboard audio there. Disabling the
> hw:0,0 is sort of a last resort before I just rewrite my stuff in
> something other than supercollider, that doesn't require jack and
> actually allows selecting another audio device.
Have you tried with the mainline kernel, if you should be running a
'special' one instead?
bananapi: sudo pacman -S linux-armv7
I have an Olinuxino-LIME2 running ArchLinux with linux-armv7, it has the
same SOC (Allwinner A20) as the bananapi, iirc, and aplay only shows my
usb card.
lime2: aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MK2 [Traktor Audio 2 MK2], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
P.s. the mainline kernel does not ship with GPU acceleration and some
other drivers that may be vital to your application...
P.p.s: I'd recommend to use JACK1 instead of JACK2 on embedded platforms.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user
Received on Mon Oct 5 12:15:01 2015
This archive was generated by hypermail 2.1.8 : Mon Oct 05 2015 - 12:15:02 EEST