Re: [LAU] Jconvolver on Raspberry Pi

You are right

I first thought you made a mistake and had tried to connect the *outputs* of
jconvolver to the soundcard, i.e. add the soundcard ports to the
/output/name lines.

But didn't got sound.

than Idid what you said connect the *intputs* of jconvolver to the
soundcard, i.e. add the soundcard ports to the /intput/name lines.

and got sound, but after listening to a known track, I understood that it
was not convoluted.

So what i just did, and now it looks like working.
I changed again filter-44100.conf, this way :
/# Replace by whatever required...
#
#/cd /root/folve/filter
#
# in out partition maxsize
# ---------------------------------------------------------------
/convolver/new 2 2 1024 65536
#
#
# num port name connect to
# -----------------------------------------------
/input/name 1 in.L
/input/name 2 in.R
#
/output/name 1 out.L
/output/name 2 out.R
#
#
# in out gain delay offset length chan file
# --------------------------------------------------------------------------
/impulse/read 1 1 0.75 0 0 0 1 T-Monacor_SPH30X.wav
/impulse/read 2 2 0.75 0 0 0 1 T-Monacor_SPH30X.wav
#/
Than,
1/ start jack2 : jackd -d alsa -r 44100 -p 256 -n 16 -P -S
2/ start jconvolver : jconvolver filter-44100.conf
3/ jack_disconnect system:playback_1 jconvolver:out.L -> OK
4/ jack_disconnect system:playback_2 jconvolver:out.R -> cannot disconnect
client, already disconnected?
5/ start squeezelite : squeezelite-arm -o jack

I have sound and quite sure it is convoluted,
i'm a little bit lost in all this !

What do you think ?

Best regards and thank you for helping me.
Jean

--
View this message in context: http://linux-audio.4202.n7.nabble.com/Jconvolver-on-Raspberry-Pi-tp98952p98965.html
Sent from the linux-audio-user mailing list archive at Nabble.com.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-user