Subject: Re: [linux-audio-dev] time stretching and compression under Linux ?
From: Rick (destinytech_AT_spacey.net)
Date: Tue Nov 13 2001 - 21:29:13 EET
Hmmm, my thoughts on this would be that isn't the crystal biased? If
you connect them together you are going to affect the biasing. What you
want to do is sync them, but if you think about it, I don't see that
happening. If the crystals oscilate, you are going to get current
flowing across the wire in both directions based on the phase
difference, jitter and drift, and its going to cause distortion in the
signal, but not change the phase to be in sync. I could be wrong though
:) If so, let me know :)
Rick
iriXx wrote:
> Mark Rages wrote:
>
>> Why don't you just solder over a wire to connect the two crystals?
>>
>> Connect a wire from one leg of the crystal on the first board to the
>> other leg of the crystal on the other board. You only need one wire,
>> but use a shielded on e and ground the shield at one end.
>>
>> Let me know if it works!
>>
>
> thats a great idea, thanks Mark!
>
> i think we're going to look into trying that... it may well be the
> simplest solution.
>
> we'll certainly be writing this up if it works... maybe even writing
> up the experimental results if it doesnt quite get there. i think its
> an idea well worth trying at least.... :o)))
>
>
> many thanks
>
>
> m
>
> --
> ~~~~~>><:>~~~~
> iriXx
>
> miriam_AT_iriXx.org
> www.iriXx.org
>
> "i'm not here... this isn't happening..."
>
This archive was generated by hypermail 2b28 : Tue Nov 13 2001 - 21:30:07 EET